Configuring the SPB-PIM Gateway VLAN optional parameters

Configure the SPB-PIM Gateway interface parameters on a VLAN.

Procedure

Enter VLAN Interface Configuration mode:

enable

configure terminal

interface vlan <1–4059>
Configure the SPB-PIM Gateway VLAN HELLO interval:

ip spb-pim-gw hello-interval <0-18724>
Configure the SPB-PIM Gateway VLAN JOIN PRUNE interval:

ip spb-pim-gw ip join-prune-interval <1-18724>

The following table defines parameters for the ip spb-pim-gw command.


Variable	Value
hello-interval`<0-18724>`	Specifies the HELLO interval in seconds. The default value is 30 seconds.
join-prune-interval`<1-18724>`	Specifies the JOIN PRUNE interval in seconds. The default value is 60 seconds.