Configure a RADIUS Dynamic-server Client

About this task

Use this procedure to configure a client to allow processing of dynamic session changes.

Before you begin

You must enable EAPOL globally and at the port level.

You must enable RADIUS dynamic extensions commands processing at the port level.

Procedure

  1. In the navigation pane, expand Configuration > Security > Control Path.
  2. Click RADIUS CoA.
  3. Click Global.
  4. Click Insert.
  5. In the Address field type a client address.
  6. Optional: In the UdpPort field, type a value for client port.
  7. Optional: In the Secret field, type a value for the secret key.
  8. Select the Enable checkbox to enable dynamic session processing for the client.
  9. Click Insert.

Global field descriptions

Use the data in the following table to use the Global tab.

Name

Description

AddressType

Specifies the type of address contained in the corresponding instance of a RADIUS Dynamic Authorization Client configured in this entry.

Address

Specifies the internet address of a RADIUS Dynamic Authorization Client configured in this entry.

UdpPort

Specifies the UDP port number the server/NAS listens on for requests from the RADIUS Dynamic Authorization Client configured in this entry.

Secret

Specifies the secret key shared between the RADIUS Dynamic Authorization Client and Server. Note that when this object is retrieved, it's value will always by a zero-length octet string.

Enable

Enable processing of dynamic session changes.
9037147-00 Rev AB