Configure Target Table Parameters

About this task

Configure the target table to configure the security parameters for SNMP. Configure the target table to configure parameters such as SNMP version and security levels.

Procedure

  1. In the navigation pane, expand Configuration > Edit > SnmpV3.
  2. Click Target Table.
  3. Click the Target Params Table tab.
  4. Click Insert.
  5. In the Name box, type a target table name.
  6. From the MPModel options, select an SNMP version.
  7. From the Security Model options, select the security model.
  8. In the SecurityName box, type readview or writeview.
  9. From the SecurityLevel options, select the security level for the table.
  10. Click Insert.

Target Params Table Field Descriptions

Use the data in the following table to use the Target Params Table tab.

Name

Description

Name

Identifies the target table.

MPModel

Specifies the message processing model to use to generate messages: SNMPv1, SNMPv2c, or SNMPv3/USM.

SecurityModel

Specifies the security model to use to generate messages: SNMPv1, SNMPv2c, or USM. You can receive an inconsistentValue error if you try to configure this variable to a value for a security model that the implementation does not support.

SecurityName

Identifies the principal on whose behalf SNMP messages are generated.

SecurityLevel

Specifies the security level used to generate SNMP messages: noAuthNoPriv, authNoPriv, or authPriv.