Copy a File

About this task

Copy files on the internal flash.

Procedure

  1. In the navigation pane, expand Configuration > Edit.
  2. Select File System.
  3. Select the Copy File tab.
  4. Edit the fields as required.
  5. Select Apply.

Copy File Field Descriptions

Use the data in the following table to use the Copy File tab.

Name

Description

Source

Identifies the device and file name to copy. You must specify the full path and filename, for example, <deviceip-ftp server>:/<filename>
Note:

For certain switches in enhanced secure mode, sensitive files and paths are protected.

Destination

Identifies the location to which to copy the source file with the filename, for example, /intflash/<filename>.

Note:

For certain switches in enhanced secure mode, sensitive files and paths are protected.

Action

Starts or stops the copy process.

Result

Specifies the result of the copy process:

  • none

  • inProgress

  • success

  • fail

  • invalidSource

  • invalidDestination

  • outOfMemory

  • outOfSpace

  • fileNotFound