Perform this procedure after you restart the affected chassis.
Configuration files from each chassis: Stored on the internal flash at /intflash/.
Log files from each chassis: Stored on the internal flash at /intflash/.
Generated archive files for slot: Stored on the internal flash. For example: /intflash/archive/<slot>
Note
For , if the core file is not on the primary control processor (CP), you can use FTP to connect to the internal flash of the primary CP. For example, cp mnt/intflash/archive/<slot>/<filename> /intflash/<filename>
To copy the file to internal flash or usb device in the primary CP, use the following command: cp mnt/intflash/archive/<slot>/<filename> {/intflash/<filename> | /usb/<filename>}