Installing EDM help files

While the EDM GUI is bundled with the switch software, the associated EDM help files are not. To access the help files from the EDM GUI, you must install the EDM help files on a TFTP or FTP server in your network.

Use the following procedure to install the EDM help files on a TFTP or FTP server, and configure EDM to use the help files

Before you begin

If you use an FTP server to store the help files, ensure that you configure the switch with the host user name and password.

Procedure

  1. Download the EDM help file.
  2. On a TFTP or FTP server reachable from the switch, create a directory called Help.
    Tip

    Tip

    You can name the directory anything that will help you remember its purpose.

  3. Unzip the EDM help zip file into the directory created in the preceding step.
  4. In the EDM navigation pane, expand the Configuration > Security > Control Path folders.
  5. Click General.
  6. Click Web.
  7. In the HelpTftp/Ftp_SourceDir field, enter the IP address of the file server and the path to the help files, for example, 192.0.2.15:/home/Help/.
9037147-00 Rev AB