Viewing IPv6 BGP+ network configurations

Display information about BGP+ network configurations.

Procedure

  1. To enter User EXEC mode, log on to the switch.
  2. Display information about BGP+ network configurations:

    show bgp ipv6 networks <WORD 1-256> [vrf <WORD 1-16>] [vrfids <0-255>]

Variable Definitions

The following table defines parameters for the show bgp ipv6 networks command.

Variable

Value

<WORD 1–256>

Specifies the IPv6 prefix and the prefix length (must be an integer value between 0 and 128).

vrf

Specifies a VRF instance by name (the string length ranges from 1–16 characters).

vrfids

Specifies a range of VRFs by ID number (the ID ranges from 0–255).