Remove a Software Build

Use the following procedure to remove a software build for the switch.

Note

Note

You can store up to 6 software releases on most switches. When the limit is reached, you are prompted to remove one release before you can proceed with adding and activating a new software release.

You can store a maximum of 2 software releases on the 5420 Series. When the limit is reached, the software displays a confirmation to overwrite the non-primary release before you can install a new software release.

For more information, see Upgrade the Software.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. Remove the software build:

    software remove WORD<1-99>

Example

Remove the software build:

Switch:1>enable
Switch:1#software remove w.x.y.z