Configuring an ACE ICMP message type

Configure ACE Internet Control Message Protocol (ICMP) message type entries to have the filter look for packets of a specific ICMP message type.

Before you begin

  • The ACL exists.

  • The ACE exists.

Procedure

  1. In the navigation tree, expand the following folders: Configuration > Security > Data Path.
  2. Click Advanced Filters (ACE/ACLs).
  3. Click the ACL tab.
  4. Select the appropriate ACL.
  5. Click ACE.
  6. Select the appropriate ACE.
  7. Click Proto.
  8. Click the Icmp Msg Type tab.
  9. Click Insert.
  10. Specify the operator for the ICMP message type.
  11. In the List box, specify the ICMP messages to match.
  12. Click Insert.

Icmp Msg Type field descriptions

Use the data in the following table to use the Icmp Msg Type tab.

Name

Description

AclId

Specifies the ACL ID.

AceId

Specifies the ACE ID.

Oper

Specifies the operator for the ACE protocol ICMP message type. Equal (eq) is the only option.

List

Specifies the ICMP message type (0–255), or echoreply, destunreach, sourcequench, redirect, echo-request, routeradv, routerselect, time-exceeded, param-problem, timestamp-request, timestamp-reply, addressmask-request, addressmask-reply, or traceroute.
9037147-00 Rev AB