Display Advanced Feature Bandwidth Reservation Ports

Note

This procedure applies to 5420 Series, 5520 Series, and VSP 7400 Series.

After you configure the advanced-feature-bandwidth-reservation boot flag and reboot with the new configuration, you can use the following procedure to verify that the switch reserved ports for configuring advanced features such as Fabric Extend, SPB, SMLT, vIST, VXLAN Gateway, Fabric RSPAN (Mirror to I-SID), Application Telemetry, or IS-IS Accept Policies.

Procedure

To enter User EXEC mode, log on to the switch.
Display the Advanced Feature Bandwidth Reservation mode and reserved ports:

show sys-info

Example

Switch# show sys-info

General Info :

SysDescr     : Switch1 (w.x.y.z)   BoxType: Switch1
SysName      : Switch1
.
.
.

Advanced Feature Bandwidth Reservation:
--------------------------------------------------------------------------------

Reservation Mode : low
Port Usage Info  : 1/31 and 1/32 are not available to use