Configuring Rate Limits on an Extreme Integrated Application Hosting Port

About this task

Perform this procedure to configure the rate limit of broadcast or multicast packets and determine the total bandwidth limit on the Extreme Integrated Application Hosting (IAH) port.

Procedure

  1. In the navigation pane, expand the following folders: Configuration > Edit > Insight Port.
  2. Select the IAH port you want to configure.
  3. Select the Rate Limiting tab.
  4. In the AllowedRatePps column, enter a time duration for the specific Extreme Integrated Application Hosting port.
  5. In the Enable column, select true to enable rate limiting for the specific IAH port.
  6. Select Apply.

Rate Limiting Field Descriptions

Name

Description

Index

Specifies the Extreme Integrated Application Hosting (IAH) port.

TrafficType

Shows the traffic type. The default is broadcast.

AllowedRatePps

Specifies the allowed traffic rate limit for the IAH port in packets per second (pps).

Enable

Enables or disables rate limiting for the specific IAH port. The default is false (disabled).
9037147-00 Rev AB