Enable or Disable RA Guard Globally

About this task

Enables RA Guard globally. By default, RA Guard is disabled.

Procedure

  1. Enter Global Configuration mode:

    enable

    configure terminal

  2. Enable FHS globally:

    ipv6 fhs enable

  3. Enable RA Guard globally:

    ipv6 fhs ra-guard enable

  4. Disable RA Guard globally:

    no ipv6 fhs ra-guard enable

  5. Set the RA Guard to its default value:

    default ipv6 fhs ra-guard enable

9037147-00 Rev AB