Modify the IPv6 RSMLT Local Information

Edit the existing RSMLT configuration for the local node in the cluster.

Procedure

  1. In the navigation pane, expand ConfigurationIPv6.
  2. Select RSMLT.
  3. Select the Local tab.
  4. Select a cell to change the value.
  5. Select Apply.

Local field descriptions

Use the data in the following table to use the Local tab.

Name

Description

IfIndex

Shows the route SMLT operation index.

Ipv6Addr

Configures the IPv6 address of the RSMLT interface.

Ipv6PrefixLength

Configures the IPv6 prefix length.

Enable

Enables or disables RSMLT. The default is disabled.

HoldDownTimer

Defines how long the recovering/rebooting switch remains in a non-Layer 3 forwarding mode for the peer router MAC address.

The default is 60.

HoldUpTimer

Defines how long the RSMLT switch maintains forwarding for its peer. The value is a range from 0 to 3600 seconds or 9999. 9999 means infinity.

The default is 1800.

OperStatus

Displays the RSMLT operating status as either up or down.

SmltId

Specifies the ID range for the SMLT.

VlanId

Configures the VLAN ID.

MacAddr

Configures the MAC address of the VLAN.

VrfId

Indicates the virtual router ID to which the local RSMLT instance belongs.

VrfName

Indicates the virtual router name to which the local RSMLT instance belongs.