Manage the RA Guard Policy

About this task

Configure or modify RA Guard policy. This command also enables the RA Guard configuration mode.

Procedure

  1. Enter Global Configuration mode:

    enable

    configure terminal

  2. Create the RA Guard policy:

    ipv6 fhs ra-guard policy WORD<1-64>

  3. Delete the RA Guard policy:

    no ipv6 fhs ra-guard policy WORD<1-64>

    Note

    Note

    You cannot delete a policy that is attached to a port.

Variable Definitions

The following table defines parameters for the ipv6 fhs ra-guard policy command.

Variable

Description

WORD<1–64>

Specifies the name of the RA Guard policy to be created or deleted.

This is a mandatory parameter in this command.