Display RA Guard Configuration

About this task

Display configured RA Guard policy information.

Procedure

  1. To enter User EXEC mode, log on to the switch.
  2. Display configured RA Guard policy information:

    show ipv6 fhs ra-guard policy WORD<1–64>

Example

Switch:1# show ipv6 fhs ra-guard policy
============================================================================================================
                                                  IPv6 Ra Guard Policy Info
============================================================================================================
                                                                                     MIN-HOP MAX-HOP MANAGED
POLICY-NAME    RA-SRC-ADDR-LIST  RA-MAC-ADDR-LIST  RA-PREFIX-LIST   LIMIT    LIMIT   CON-FLAG PREF
-------------------------------------------------------------------------------------------------------------
 Ra_guard_pol1    None              None               acl1           0        0         None            None
-------------------------------------------------------------------------------------------------------------
  
All 1 out of 1 Total Num of ra-guard policy entries displayed

Variable Definitions

The following table defines parameters for the show ipv6 fhs ra-guard policy command.

Variable

Description

WORD<1–64>

Displays the RA Guard policy for the specified policy-name. By default, all the configured RA Guard policies are displayed.