Display Endpoint Tracking binding information.Use the data in the following table to use the Binding tab.

Display Binding Information

Display Endpoint Tracking binding information.

About this task

Display all VLAN:ISID binding information on the switch for Endpoint Tracking.

Procedure

  1. In the navigation pane, expand Configuration > Edit.
  2. Select Endpoint Tracking.
  3. Select the Binding tab.

Binding Field Descriptions

Use the data in the following table to use the Binding tab.

Name Description

IfIndex

Specifies the interface index of the selected port or MLT.

MacAddress

Specifies the MAC address that corresponds to the VLAN:ISID binding.

Status

Specifies the Endpoint Tracking data binding status as follows:

  • pending: indicates that a request has been sent to the RADIUS server

  • accept: indicates that the RADIUS server has successfully returned the request

  • reject: indicates that the RADIUS server has rejected the request

  • timeout: indicates that the RADIUS server request has timed out. The entry is deleted if it remains in this state for 15 minutes.

  • serverNotConfigured: indicates that the RADIUS server is not configured for Endpoint Tracking. The entry is deleted if it remains in this state for 15 minutes.

VlanId

Specifies the VLAN ID.

Isid

Specifies the I-SID value, either provided by the RADIUS server, or calculated using the VLAN ID plus the configured I-SID offset value.

IsidSource

Specifies whether the I-SID value is provided by the RADIUS server (radius), or calculated using the VLAN ID plus the configured endpoint-tracking offset value (autoconfig).

Timeout

Specifies the timeout period that is applied to the MAC in the bindings table when the MAC is aged out. If the MAC is in timeout state (there is no response from the RADIUS server), the timeout triggers immediately with a 15 minute period. Otherwise, the default timeout is one day, and triggers the moment the MAC ages out from the VLAN/I-SID bridge forwarding database (FDB) table. The default timeout of one day can be overridden by the RADIUS server if the Session-Timeout attribute is configured and returned.

TimeRemaining

Specifies the time remaining until the Endpoint Tracking data binding entry expires.
9037147-00 Rev AB