Configure an ACE to Filter IPv4 Routed Packets
Configure an ACE to filter IPv4 routed packets.
Note
This procedure does not apply to VSP 8600 Series or XA1400 Series.
Before you begin
The ACL exists.
The ACE exists.
Procedure
- In the navigation pane, expand .
- Select Advanced Filters (ACE/ACLs).
- Select IpRouted tab.
- Select Insert.
- In the AclId field, type the appropriate ACL ID.
- In the AceId field, type the appropriate ACE ID.
- RoutedOnly
- Select Insert.
IpRouted Field Descriptions
The following table describes values on the IpRouted tab.
|
Name |
Description |
|---|---|
|
AclId |
Specifies the ACL ID. Value range of 1 to 2048. |
|
AceId |
Specifies the ACE ID. Value range of 1 to 2000. |