Displaying Port Power Measurement

About this task

Perform the following procedure to display the PoE power measurement. You can view the voltage, amperage, and wattage for every PoE port. PoE ports without a PD in use are measured as zeros.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. View measurement information:

    show poe-power-measurement

Example

Switch:1#show poe-power-measurement	
================================================================================
                              POE Port Measurement
================================================================================
PORT  Volt(V)  CURRENT (mA)  POWER(Watt) 
--------------------------------------------------------------------------------
1/1   34.0     117           6.200       
1/2   34.0     94            5.000       
1/3   34.0     535           28.500      
1/4   0.0      0             0.000       
1/5   0.0      0             0.000       
1/6   34.0     525           27.900      
1/7   34.0     152           8.100       
1/8   34.0     49            2.600
Note

Note

The PoE port measurement for all ports is displayed. The preceding output is a sample of the full output.