View UNI Ports for remote IP Multicast Routes
Note
This procedure only applies to the VSP 7400 Series.
About this task
Perform this procedure to view the UNI ports associated with particular remote IP multicast routes.
Procedure
- In the navigation pane, expand the folders.
- Select SPBM Remote.
- Select the IpMcastRoutes tab.
- Select an entry.
- Select the UNI Ports button.
IpMcastRoutes-Uni Ports Field Descriptions
Use data in the following table to use the IpMcastRoutes-Uni Ports tab.
|
Name |
Description |
|---|---|
|
VsnIsid |
Specifies the VSN I-SID. Layer 2 VSN and Layer 3 VSN each require a VSN I-SID. |
|
Group |
Specifies the group IP address for the IP Multicast over Fabric Connect route. |
|
Source |
Specifies the IP address where the IP Multicast over Fabric Connect route originates. |
|
NickName |
Specifies the nickname. |
|
EgressVlan |
Specifies the egress VLAN of the IP multicast route. |
|
EgressActivePorts |
Specifies the egress active ports. |