Enabling RMON on a Port or VLAN

Use the following procedure to enable RMON on an interface.

Before you begin

  • Enable RMON globally.

Procedure

  1. Enable RMON on a VLAN:
    1. In the navigation pane, expand the Configuration > VLAN folders.
    2. Click VLANs.
    3. Click the Advanced tab.
    4. In the row for the VLAN, double-click the RmonEnable field, and then select enable.
    5. Click Apply.
  2. Enable RMON on a port:
    1. In the Device Physical View, select a port.
    2. In the navigation pane, expand the Configuration > Edit > Port folders.
    3. Click General.
    4. Click the Interface tab.
    5. For the RmonEnable field, select enable.
    6. Click Apply.
9037147-00 Rev AB