Use the data in the following table to use the Energy Saver tab.

Enable Energy Saver or EEE on Ports

About this task

Perform this procedure to enable Energy Saver or EEE on one or more ports.

Procedure

  1. On the Device Physical View tab, select one or more ports.
  2. In the navigation pane, expand Edit > Port.
  3. Select General.
  4. Select the Energy Saver tab.
  5. Enable either Energy Saver or EEE:
    • To enable Energy Saver, select EnergySaverEnabled.

    • To enable EEE, select EnergySaverEEEEnable.

  6. Select Apply.

Energy Saver Field Descriptions

Use the data in the following table to use the Energy Saver tab.

Name Description

Port

Specifies the port number.

EnergySaverEnabled

Configures whether Energy Saver is enabled on the specific port.

EnergySavedPoeStatus

Specifies the Energy Saver PoE status for the specific port.

EnergySaverEEEEnable

Configures whether EEE is enabled on the specific port.