Display Global PoE Configuration

About this task

Perform the following procedure to display the global PoE configuration. You can view the global PoE status, power consumption, power limit threshold, and more.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. View the global configuration:

    show poe-main-status

Example

Switch:1#show poe-main-status 	
================================================================================
                         PoE Main Status - Stand-alone
================================================================================
Available DTE Power        : 1855 Watts
DTE Power Status           : NORMAL
DTE Power Consumption      : 92 Watts
DTE Power Usage Threshold  : 80
PD Detect Type             : 802.3at and Legacy
Power Source Present       : AC Only
Primary Power Status       : Present and operational
Redundant Power Status     : Present and Operational
Fast POE Status            : Enabled
Perpetual POE Status       : Enabled
POE Firmware Version:      : 3.0.0.6