View Remote SPBM I-SID Information

Note

Note

This procedure only applies to the VSP 7400 Series.

About this task

Perform this procedure to view the SPBM Service Instance Identifier (I-SID) information. The SPBM B-MAC header includes an I-SID with a length of 24 bits. This I-SID can be used to identify and transmit any virtualized traffic in an encapsulated SPBM frame.

Procedure

  1. In the navigation pane, expand the Configuration > IS-IS folders.
  2. Select SPBM Remote.
  3. Select the I-SID tab.
  4. Optional: Select the Filter button to filter the rows on basis of specific criteria.

I-SID Field Descriptions

Use data in the following table to use the I-SID tab.

Name

Description

SysId

Indicates the system identifier.

Vlan

Indicates the B-VLAN where the remote I-SID is configured or discovered.

Isid

Indicates the remote IS-IS SPBM I-SID identifier.

NickName

Indicates the nickname of the node where the remote I-SID is configured or discovered.

HostName

Indicates the host name listed in the LSP, or the system name, if you do not configure the host name.

Type

Indicates the remote SPBM I-SID type. The values are discover or configure.