Display IS-IS Link State Database Information

Perform the following procedure to display the IS-IS link state database related information on the switch.

Procedure

To enter User EXEC mode, log on to the switch.
Display IS-IS link state database information:

show isis lsdb ipv6-unicast [i-sid <0-16777215>] [lspid xxxx.xxxx.xxxx.xx-xx] [sysid xxxx.xxxx.xxxx] [home|remote]

Example

Switch:1>show isis lsdb ipv6-unicast
====================================================================================
                         ISIS IPv6-UNICAST-ROUTE SUMMARY
====================================================================================   
                           PREFIX            METRIC     TLV     LSP   HOST          
I-SID     ADDRESS          LENGTH  METRIC    TYPE       TYPE    FRAG  NAME  AREA          
-----------------------------------------------------------------------------------
4       2222:0:0:0:0:0:0:0    64      1       Internal  184     0x2   4210  HOME          
4       2222:0:0:0:0:0:0:0    64      1       Internal  184     0x2   4210  REMOTE         
-----------------------------------------------------------------------------------
2 out of 2 Total Num of Entries