Modify Global I-SID Name

About this task

Use this procedure to modify the assigned name for the Service Identifier (I-SID).

Note

Note

Product Notice: For XA1400 Series, you can modify a service name for IPv4 static routes and IPv4 loopback CLIP interfaces only. For information about feature support, see VOSS Feature Support Matrix.

Note

Note

This procedure is not supported on VSP 8600 Series.

Procedure

  1. In the navigation pane, expand Configuration > IS-IS.
  2. Select ISID.
  3. Select Global Name.
  4. View the name of the I-SID in the ISID Name field. To modify, double-click the name of the I-SID and type a new name.
  5. Select Apply.

Global Name Field Descriptions

Use the data in the following table to use the Global Name tab.

Name

Description

ISID Id

Specifies the index number that uniquely identifies the I-SID.

ISID Name

Specifies the name of the I-SID, which can be up to 64 characters.

This field is not supported on all hardware platforms.
UsedByType

Specifies the I-SIDs that are in use as services. An I-SID can have one base type or a combination of base types so that multiple services can use the same I-SID at the same time.

9037147-00 Rev AB