Display BFD Configurations on the Loopback Interface

About this task

Use the following procedure to display all BFD configurations on the loopback interface.

Procedure

  1. To enter User EXEC mode, log on to the switch.
  2. Display the BFD configurations:

    show ip bfd interfaces loopback

Example

The following example displays BFD configurations on the Loopback Interface:
Switch:1>enable
Switch:1#show ip bfd interfaces loopback
================================================================================
                          Circuitless IP Interface Bfd
================================================================================
INTF ID    STATUS     MIN_RX     INTERVAL   MULTIPLIER      VRF-ID
--------------------------------------------------------------------------------
1          enable     200        200        3               0
2          enable     200        200        3               2