Display IS-IS Multi-area SPB IPv6 Redistribution Configuration

Note

Note

This procedure only applies to the VSP 7400 Series.

About this task

Perform this procedure to display the IS-IS Multi-area SPB IPv6 redistribution configuration for home to remote, remote to home, unicast, specific Virtual Router Forwarding (VRF) instance, and VRF IDs on the switch.

Procedure

  1. To enter User EXEC mode, log on to the switch.
  2. Display the IS-IS Multi-area SPB IPv6 home to remote redistribution configuration:

    show isis multi-area ipv6 redistribute [home-to-remote [vrf WORD<1-16> | vrfids WORD<0-512>]]

  3. Display the IS-IS Multi-area SPB IPv6 remote to home redistribution configuration:

    show isis multi-area ipv6 redistribute [remote-to-home [vrf WORD<1-16> | vrfids WORD<0-512>]]

  4. Display the IS-IS Multi-area SPB IPv6 unicast redistribution configuration:

    show isis multi-area ipv6 redistribute unicast [home-to-remote [vrf WORD<1-16> | vrfids WORD<0-512>] | remote-to-home [vrf WORD<1-16> | vrfids WORD<0-512>] | vrf WORD<1-16> | vrfids WORD<0-512>]]

  5. Display the IS-IS Multi-area SPB IPv6 redistribution configuration for VRF instance:

    show isis multi-area ipv6 redistribute [vrf WORD<1-16>]

  6. Display the IS-IS Multi-area SPB IPv6 redistribution configuration for VRF ID:

    show isis multi-area ipv6 redistribute [vrfids WORD<0-512>]

Example

Displaying the IS-IS Multi-area SPB IPv6 unicast redistribution configuration:

Switch:1>show isis multi-area ipv6 redistribute unicast
======================================================================================
        ISIS Multiarea Redistribute List for ipv6 unicast - GlobalRouter
======================================================================================
DIRECTION            ENABLE     RPOLICY
--------------------------------------------------------------------------------------
home-to-remote       TRUE       Test1
remote-to-home       TRUE       Test2