Prepare a slot for IOC Module Preconfiguration using EDM

About this task

Use this procedure to designate a slot in the switch for IOC Module Preconfiguration. A slot can be designated for only one module type at a time.

Procedure

  1. In the navigation pane, expand Configuration > Edit > Card Preconfig.
  2. Click Insert.
  3. Enter the slot number in the Slot field.
  4. Select the IOC Module type in the CardType field.
  5. Select the Lock field to lock the slot to the specified IOC Module type.
  6. Click Insert.

Card Preconfig Field Descriptions

Use the data in the following table to use the Card Preconfig tab.

Field Description
Slot Specifies the slot number designated for pre-configuration.
CardType Specifies the type of the IOC Module designated for the slot.
Lock If selected, the slot is locked to only accept the type of IOC Module designated.