Use this procedure if you want the switch to support advanced features. When you enable
the boot flag, you need to save and reboot with the new configuration.
Before you begin
Product Notice: For 5420 Series, 5520 Series, and VSP 7400
Series, you must
ensure your configuration does not include reserved ports before you enable this
feature. If the configuration includes reserved ports after you enable this feature
and restart the switch, the switch stops loading the configuration.
Procedure
-
In the navigation pane, expand
.
-
Select the Boot Config
tab.
-
In the AdvancedFeatureBWReservation field, select high or
low or
vim to enable the boot flag.
-
Select Apply.
A message displays to remind you that the configuration cannot include
reserved ports, and that you must save the configuration and reboot the
switch for changes to take effect.
-
Select Yes to continue
or select No to cancel the change because the configuration includes
reserved ports.
If you selected No, you can modify your switch configuration to remove the
reserved ports and then return to this tab to change the AdvancedFeatureBWReservation configuration.
-
Save the configuration, and then
reboot the switch.
