Create an IPv6 VPN Instance on a VRF

Create an IPv6 VPN instance to advertise IPv6 routes from a VRF to Shortest Path Bridging MAC (SPBM) network.

Before you begin

  • You must configure the required SPBM IS-IS infrastructure.

  • The VRF must exist.

Procedure

  1. In the navigation tree, expand Configuration > IPv6.
  2. Select IPv6-VPN.
  3. Select the VPN tab.
  4. Select Insert.
  5. Select [...], and then select a VRF from the list.
  6. Select OK.
  7. Select Insert.
  8. In the IsidNumber column, double-click the 0 value, and then enter the service instance identifier (I-SID) to assign to the IPv6-VPN.
  9. In the Enable column, double-click the value and select true or false from the drop-down list.
  10. Select Apply.

VPN Field Descriptions

Use the data in the following table to use the VPN tab.

Name

Description

VrfId

Specifies the ID of the VRF to configure.

Enable

Enables or disables the IPv6 VPN instance on the VRF. The default is disabled.

IsidNumber

Specifies the I-SID to associate with the IPv6 VPN. By default, no I-SID is assigned.

IsidName

Note:

This field is not supported on all hardware platforms.

Specifies the name of the I-SID.
9037147-00 Rev AB