Configure a Web Server Certificate

Note

Note

This procedure does not apply to VSP 8600 Series.

About this task

Use this task to configure a web server certificate.

Procedure

  1. Enter Global Configuration mode:

    enable

    configure terminal

  2. Configure the Certificate Authority for the installed digital certificate:

    web-server certificate ca-name <1-45>

  3. Configure the subject identity label to be used

    web-server certificate cert-subject-name <1-45>

Example

Display the web server certificate information:
Switch:1(config)#web-server certificate cert-subject-name 823
Switch:1(config)#1 2021--2--2T14:35:38.865z Switch CP1 - 0x003z8604 - 0000000
GlobalRouter DIGITALCERT INFO Digital Certificate Module: Configuration Saved 
1 2021--2--2T14:35:38.865z Switch CP1 Switch CP1 - 0x00040601 - 0000000 Global Router
WEB INFO HTPS: Using the CA Signed Server Cert