Configure CP Limit

Configure CP Limit functionality to protect the switch from becoming congested by an excess of data flowing through one or more ports.

Procedure

  1. In the Device Physical View tab, select a port.
  2. In the navigation pane, expand Configuration > Edit > Port.
  3. Click General.
  4. Click the CP Limit tab.
  5. Select the AutoRecoverPort check box.
  6. Click Apply.

CP Limit field descriptions

Use the data in the following table to use the CP Limit tab.

Name

Description

AutoRecoverPort

Activates or disables auto recovery of the port from action taken by CP Limit or link flap features. The default value is disabled.