Configuring the MSDP mesh groups

Configure mesh groups to reduce SA flooding. A mesh group does not forward SA messages to other group members in the same mesh group. The originator, which is also a mesh group member, forwards SA messages to all group members. Create MSDP mesh groups from a group of meshed MSDP speakers from a domain. Do not create MSDP peerings between Controllers within the same SPB domain.

Procedure

  1. In the navigation pane, expand Configuration > IP.
  2. Click MSDP.
  3. Click the Mesh Group tab.
  4. Click Insert.
  5. In the Name field, type a name for the mesh group.
  6. In the PeerAddress field, type the IP address of the peer to add the mesh group.
  7. Click Insert.

Mesh Group field descriptions

Use the data in the following table to use the Mesh Group tab.

Name

Description

Name

Specifies the mesh group ID; the name of the mesh group from 1-64 characters.

PeerAddress

Specifies the IP address of the MSDP router that is the peer.
9037147-00 Rev AB