View Remote DvR Backbone Entries on a Controller

Note

Note

This procedure only applies to the VSP 7400 Series.

Before you begin

Ensure that you enable DvR globally on the node.

About this task

Perform this procedure to view the remote DvR backbone entries (redistributed host routes) learned from all Controllers in all DvR domains.

Note

Note

You can view DvR backbone entries only on a Controller. Viewing backbone entries does not apply to a Leaf node.

Procedure

  1. In the navigation pane, expand Configuration > Edit.
  2. Select DVR Remote.
  3. Select the Backbone Entries tab.
  4. Optional: To filter the rows based on the specific criteria, click Filter.

Backbone Entries Field Descriptions

Use the data in the following table to use the Backbone Entries tab.

Name

Description

IpAddrType

Specifies the address type of the DvRbackbone host (IPv4 remote ARP).

IpAddr

Specifies the IPv4 address of the DvR backbone host.

L3Isid

Specifies the Layer 3 I-SID of the DvR backbone host.

DomainId

Specifies the domain ID of the DvR backbone host.

EcmpIndex

Specifies the ECMP index of the DvR backbone host.

HostMacAddr

Specifies the MAC address of DvR backbone host.

L2Isid

Specifies the Layer 2 I-SID of the DvR backbone host.

AdvControllerName

Specifies the host name of the advertising Controller.

AdvController

Specifies the host MAC address of the advertising Controller.

NextHopName

Specifies the host name of the next hop Backbone host in the DvR route.

NextHopMac

Specifies the MAC address of the next hop Backbone host in the DvR route.