Display IS-IS Multi-area SPB Layer 2 I-SID List Information

Note

Note

This procedure only applies to the VSP 7400 Series.

About this task

Perform this procedure to display the IS-IS Multi-area SPB layer 2 I-SID list information.

Procedure

  1. To enter User EXEC mode, log on to the switch.
  2. Display the I-SID list information on the switch:

    show isis multi-area l2 isid-list WORD<1-32>

Example

Displaying the IS-IS Multi-area SPB layer 2 I-SID list information:

Switch:1>show isis multi-area l2 isid-list test
===========================================================================
                            MULTI AREA L2 ISID LIST
===========================================================================
List Name                        I-SID / I-SID RANGE
---------------------------------------------------------------------------
test                             50510-50513

All 1 out of 1 Total Num of Isid Lists displayed