Viewing the port-based shaper information

About this task

Use this procedure to view the port-based shaper information. The system displays the port, egress rate limit in Kbps, and the rate limit status.

Procedure

Enter Privileged EXEC mode:

enable
View the ingress port-rate limit information:

show qos shaper interface gigabitEthernet [{slot/port[/sub-port][-slot/port[/sub-port]][,...]}]

Example

Switch:1# show qos shaper interface gigabitEthernet 1/1

================================================================================
                        Port Egress Rate-Limiting(Shape)
================================================================================
--------------------------------------------------------------------------------
PORT    EGRESS RATE-LIMIT(kbps)    ENABLED/DISABLED
--------------------------------------------------------------------------------
1/1     0                          DISABLED