View USB Device Information

About this task

Perform this procedure to view information about an inserted USB device.

Note

Note

This information may not apply to your hardware model. For more information about your model features, see your hardware documentation.

Procedure

  1. On the Device Physical View, select the Device.
  2. In the navigation pane, expand Configuration > Edit.
  3. Click Chassis.
  4. Click the USB tab.

USB field descriptions

Use the data in the following table to use the USB tab.

Name

Description

SlotDescription

Specifies the slot type information.

VendorId

Specifies the vendor ID for the inserted USB device.

Manufacturer

Specifies the manufacturer of the inserted USB device.

ProductId

Specifies the product ID of the inserted USB device.

ProductName

Specifies the product name of the inserted USB device.

SerialNumber

Specifies the serial number of the inserted USB device.

Revision

Specifies the release number of the inserted USB device.

MaxCurrent

Specifies the maximum power as defined by the specification for the inserted USB device. The units of measurement are milliamps.