View and Edit IPv4 RSMLT Local Information

About this task

Perform the following procedure to view and edit RSMLT local VLAN information.

Procedure

  1. In the navigation pane, expand ConfigurationIP.
  2. Select RSMLT.
  3. Select the Local tab.
  4. Configure the parameters as required.
  5. Select Apply.

Local field descriptions

Use the data in the following table to use the Local tab.

Name

Description

IfIndex

IP interface identification.

VlanId

Specifies the VLAN ID of the chosen VLAN.

IpAddr

Specifies the IP address on the RSMLT VLAN.

MacAddr

Specifies the MAC address of the selected VLAN.

Enable

Displays the RSMLT operating status as enabled or disabled.

OperStatus

Displays the RSMLT operating status as either up or down. The default is down.

HoldDownTimer

Defines how long the recovering/restarting system remains in a non-Layer 3 forwarding mode for the peer router MAC address.

The range of this value is from 0 to 3600 seconds. The default is 60.

HoldUpTimer

Defines how long the RSMLT system maintains forwarding for its peer. The value is a range from 0 to 3600 seconds or 9999. 9999 means infinity. The default is 1800.

SmltId

Specifies the ID range for the SMLT. A valid range is 1 to 512.

VrfId

Identifies the VRF.

VrfName

Indicates the VRF name.