Configuring an ACE IP protocol

Configure ACE IP protocol entries to have the filter look for packets of specific protocols.

Before you begin

  • The ACL exists.

  • The ACE exists.

Procedure

  1. In the navigation tree, expand the following folders: Configuration > Security > Data Path.
  2. Click Advanced Filters (ACE/ACLs).
  3. Click the ACL tab.
  4. Select the appropriate ACL.
  5. Click ACE.
  6. Select the appropriate ACE.
  7. Click IP.
  8. Click the Protocol tab.
  9. Click Insert.
  10. Specify the operation type.
  11. In the List box, enter the IP protocol type.
  12. Click Insert.

Protocol field descriptions

Use the data in the following table to use the Protocol tab.

Name

Description

AclId

Specifies the ACL ID.

AceId

Specifies the ACE ID.

Oper

The eq parameter specifies an operator for a field match condition: equal to.

List

Specifies the IP protocol type. Entries include 0–256, undefined, tcp, udp, ipsecesp, vrrp, and undefined.
9037147-00 Rev AB