View KHI Segmented Management Instance Information

Use the following commands to view Key Health Indicator (KHI) for segmented management instance interface information of the switch.

Procedure

To enter User EXEC mode, log on to the switch.
View KHI management instance statistics:

Note

This command and all parameters do not apply to all hardware platforms.

show khi mgmt statistics [clip | oob | vlan]

Example

Switch:1>show khi mgmt statistics
	==================================================================================================
                               Packet Counters - Interface Mgmt-oob
==================================================================================================
Packet Type                 Rx Packets           Tx Packets           Rx Packets Dropped
--------------------------------------------------------------------------------------------------
Telnet                      1034                 682                  0
Ntp                         0                    0                    173
Dhcp                        0                    0                    837
OtherUdpWellKnown           0                    0                    1182
Arp-reply                   74                   303                  0
Arp-request                 59915                74                   0
IcmpV6-nd-nbr-solicit       0                    1                    0
IcmpV6-nd-router-advert     27                   0                    0