Viewing Basic OSPF Statistics for a Port

Use statistics to help you monitor Open Shortest Path First (OSPF) performance. You can also use statistics in troubleshooting procedures.

Procedure

  1. To enter User EXEC mode, log on to the switch.
  2. View basic OSPF statistics:

    show ports statistics ospf main [{slot/port[/sub-port][-slot/port[/sub-port]][,...]}]

Example

View basic OSPF statistics:

Switch:1>enable
Switch:1#show ports statistics ospf main

================================================================================
                                Port Stats Ospf
================================================================================
PORT_NUM RX_HELLO   TX_HELLO   RXDB_DESCR TXDB_DESCR RXLS_UPDATE   TXLS_UPDATE
--------------------------------------------------------------------------------
1/3      0          0          0          0          0             0

Variable Definitions

Use the data in the following table to use the show ports statistics ospf main command.

Variable

Value

{slot/port[/sub-port][-slot/port[/sub-port]][,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.
9037147-00 Rev AB