Auto-sense Logical Flowcharts

The system uses a per-interface state to adapt to all Auto-sense events. Each state transition determines background configuration on the port. The system does not display Auto-sense port configurations in the show running-config command or in the saved configuration file; instead use the show auto-sense commands to show global and port specific Auto-sense information..

The following flowcharts describe the system logic for Auto-sense port state detection, how the system configurations change the logic path, and the Auto-sense configuration results.

Note

Note

The vlan create CLI command examples are not applicable for DvR leaf switch configurations. DvR leaf switches create VLANs automatically.
Click to expand in new window
Click to expand in new window
Auto-sense Fabric NNI
Auto-sense Fabric NNI detection results in tagged BVIDs with IS-IS NNI enabled
Click to expand in new window
Auto-sense UNI client without NAC
Auto-sense UNI client without NAC results in untagged data configuration based on system configuration
Click to expand in new window
Auto-sense UNI client with NAC
Auto-sense UNI client with NAC results in untagged, tagged, or dropped data configuration based on system configuration
Click to expand in new window
Auto-sense voice without NAC
Auto-sense voice without NAC results in untagged, tagged, or dropped data based on system configuration
Click to expand in new window
Auto-sense voice with NAC
Auto-sense voice with NAC results in untagged, tagged, or dropped data based on system configuration
Click to expand in new window
Auto-sense FA proxy switch
Auto-sense FA proxy switch results in untagged or tagged data based on system configuration
Click to expand in new window
Auto-sense FA WAP / camera / OVS without NAC
Auto-sense FA WAP or camera or OVS without NAC results in untagged or tagged data based on system configuration
Click to expand in new window
Auto-sense FA WAP / camera / OVS with NAC
Auto-sense FA WAP or camera or OVS with NAC results in untagged or tagged data based on system configuration