Showing Extended OSPF Statistics

Use statistics to help you monitor Open Shortest Path First (OSPF) performance. You can also use statistics in troubleshooting procedures.

Procedure

  1. To enter User EXEC mode, log on to the switch.
  2. Display extended OSPF information about the specified port or for all ports:

    show ports statistics ospf extended [{slot/port[/sub-port][-slot/port[/sub-port]][,...]}]

Example

Display extended OSPF information:

Switch:1>enable
Switch:1#show ports statistics ospf extended

================================================================================
                            Port Stats Ospf Extended
================================================================================
PORT_NUM RXLS_REQS  TXLS_REQS  RXLS_ACKS  TXLS_ACKS
--------------------------------------------------------------------------------
1/3      0          0          0          0

Variable Definitions

Use the data in the following table to use the show ports statistics ospf extended command.

Variable

Value

{slot/port[/sub-port][-slot/port[/sub-port]][,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.