Configuring an ACE Ethernet VLAN tag priority

Perform this procedure to filter for specific VLAN tag priorities.

Before you begin

  • The ACL exists.

  • The ACE exists.

Procedure

  1. In the navigation tree, expand the following folders: Configuration > Security > Data Path.
  2. Click Advanced Filters (ACE/ACLs).
  3. Click the ACL tab.
  4. Select the appropriate ACL.
  5. Click ACE.
  6. Select the appropriate ACE.
  7. Click Eth.
  8. Click the Vlan Tag Priority tab.
  9. Click Insert.
  10. Specify the operation type.
  11. In the VlanTagPrio box, select the priority bits.
  12. Click Insert.

VLAN Tag Priority field descriptions

Use the data in the following table to use the Vlan Tag Priority tab.

Name

Description

AclId

Specifies the ACL ID.

AceId

Specifies the ACE ID.

Oper

The eq and mask parameters specify an operator for a field match condition: equal to or mask. The mask operator is an implied eq on the mask bits.

VlanTagPrio

Specifies the priority bits (3-bit field) from the 802.1Q/p tag:

  • zero

  • one

  • two

  • three

  • four

  • five

  • six

  • seven

OperMask

Specifies the mask value in hexadecimal format if the Oper value is mask.
9037147-00 Rev AB