Displaying the UNI ports for IP multicast routes

Use this procedure to display UNI ports associated with particular IP multicast routes.

Procedure

  1. In the navigation pane, expand Configuration > IS-IS > SPBM.
  2. Click the IpMcastRoutes tab.
  3. Select the desired row and click the UNI Ports tab to display the UNI ports associated with a particular stream.

IpMcastRoutes Uni Ports field descriptions

Use the data in the following table to use the IpMcastRoutes Uni Ports tab.

Name

Description

Group

Specifies the group IP address for the IP Multicast over Fabric Connect route.

Source

Specifies the IP address where the IP Multicast over Fabric Connect route originated.

VsnIsid

Specifies the VSN I-SID. Layer 2 VSN and Layer 3 VSN each require a VSN I-SID.

DataIsid

Specifies the data I-SID for the IP multicast route. After a BEB receives the IP multicast data from a sender, a BEB allocates a data I-SID in the range of 16,000,000 to 16,512,000 for the stream. The stream is identified by the source IP address, group IP address, and the local VLAN the stream is received on. The data I-SID is a child of the scope or VSN I-SID.

SourceBeb

Specifies the source BEB for the IP multicast route.

VlanId

Specifies the ID for the C-VLAN.

VrfName

Specifies the VRF name.

NniPorts

Specifies the NNI ports for the IP multicast route.

SPBM runs in the core on the ports that connect to the core. These ports are NNI ports. Ports facing a customer VLAN are user-to-network interface (UNI) ports.

Type

Specifies the type for the IP multicast route.

Bvlan

Specifies the B-VLANs for the IP multicast route.