Viewing RP set parameters

View the RP set to see a list of rendezvous point addresses. The BSR constructs this list from C-RP advertisements, and then distributes it to all PIM routers in the PIM domain for the BSR. View the parameters for troubleshooting purposes.

Procedure

  1. In the navigation pane, expand the following folders: Configuration > IP.
  2. Click PIM.
  3. Click the RP Set tab.

RP Set field descriptions

Use the descriptions in the following table to use the RP Set tab.

Name

Description

GroupAddress

Shows the IP address of the multicast group. When combined with the group mask, this value identifies the prefix that the local router uses to advertise itself as a C-RP router.

GroupMask

Shows the address mask of the multicast group. When combined with the group address, this value identifies the prefix that the local router uses to advertise itself as a C-RP router.

Address

Shows the IP address of the C-RP router.

HoldTime

Shows the time specified in a C-RP advertisement that the BSR uses to time out the RP. After the BSR receives an advertisement for the RP, it restarts the timer. If no advertisement arrives before the timer expires, the BSR removes that RP from the RP set.

ExpiryTime

Shows the time remaining before this C-RP router times out.