Variable Definitions

The following table defines parameters for the show isis lsdb command.

Variable

Value

detail

Displays detailed information about the IS-IS Link State database.

home

Displays the IS-IS LSDB information that the system configures in the home area.

level {l1, l2, l12}

Displays information on the IS-IS level. The IEEE 802.1aq standard currently only defines the use of one hierarchy, Level 1. Level 2 function is disabled.

local

Displays information on the local LSDB.

lspid<xxxx.xxxx.xxxx.xx-xx>

Specifies information about the IS-IS Link State database by LSP ID.

remote

Displays the IS-IS LSDB information that the system configures in the remote area.

sub-tlv <1–3>

Specifies information about the IS-IS Link State database by sub-TLV.

sysid <xxxx.xxxx.xxxx>

Specifies information about the IS-IS Link State database by System ID.

tlv <1–236>

Specifies information about the IS-IS Link State database by TLV.