Manually initiate an SPF run, or calculation, to immediately update the OSPF LSDB. This configuration is useful if
you need to immediately restore a deleted OSPF-learned route
the routing table entries and the LSDBs do not synchronize
Change the VRF instance as required to configure OSPF on a specific VRF instance. The VRF must have an RP trigger of OSPF. Not all parameters are configurable on non-default VRFs.
This process is computationally intensive. Use this command only if required.
After you initiate an SPF run, wait at least 10 seconds before you initiate another SPF run.