Associating an Extreme Integrated Application Hosting Port to a VRF Instance
Note
This procedure only applies to VSP 4900 Series and VSP 7400 Series.
About this task
Perform this procedure to associate an Extreme Integrated Application Hosting (IAH) port to a Virtual Router Forwarding (VRF) instance.
Note
You can associate a VRF instance to an IAH port after you configure the VRF. By default, the IAH ports are associated to the GlobalRouter.
Procedure
- In the navigation pane, expand the following folders: .
- Select the IAH port you want to configure.
- Select the VRF tab.
- Optional: In the VrfNames field, select the ShowAll button to view the VRF instances the IAH Port is associated with.
- In the BrouterVrfId field, select the ellipsis (...) button, and select the required VRF instance(s).
- Select Ok.
- Select Apply.
VRF Field Descriptions
Use data in the following table to use the VRF tab.
Name |
Description |
---|---|
VrfIds |
Shows the VRF ID. |
VrfNames |
Shows the VRF name. |
VrfCount |
Shows the number of VRFs to which the Extreme Integrated Application Hosting (IAH) port is associated with. |
BrouterVrfId |
Specifies the VRF ID for a brouter port. |
BrouterVrfName |
Shows the VRF name for a brouter port. |