View DvR Multi-area SPB Backbone Entries on a Controller

Note

Note

This procedure only applies to the VSP 7400 Series.

Before you begin

Enable Distributed Virtual Routing (DvR) globally on the node.

About this task

Perform this procedure to view the DvR Multi-area SPB backbone entries that the system learns from all Controllers in all DvR domains.

Note

Note

You can view the backbone entries only on a DvR Controller. Viewing backbone entries does not apply to a DvR Leaf node.

Procedure

  1. In the navigation pane, expand the Configuration > Fabric folders.
  2. Select DVR.
  3. Select the MultiArea Backbone Entries tab.
  4. Optional: Select the Filter button to filter the rows on basis of specific criteria.

MultiArea Backbone Entries Field Descriptions

Use the data in the following table to use the MultiArea Backbone Entries tab.

Name

Description

IpAddrType

Specifies the address type of the DvR backbone host (IPv4 remote ARP).

IpAddr

Specifies the IPv4 address of the DvR backbone host.

L3Isid

Specifies the Layer 3 I-SID of the DvR backbone host.

DomainId

Specifies the domain ID of the DvR backbone host.

EcmpIndex

Specifies the ECMP index of the DvR backbone host.

HostMacAddr

Specifies the MAC address of DvR backbone host.

L2Isid

Specifies the Layer 2 I-SID of the DvR backbone host.

AdvControllerName

Specifies the host name of the advertising Controller.

AdvController

Specifies the host MAC address of the advertising Controller.

NextHopName

Specifies the host name of the next hop Backbone host in the DvR route.

NextHopMac

Specifies the MAC address of the next hop Backbone host in the DvR route.

Area

Specifies the type of area as home or remote.